The Wireless section includes the Basic Wireless Settings (choose the Wireless Mode – Station, Access Point, AP Repeater -, enable the WDS, choose the SSID, the WiFi standard, channel width, the output power calculate the EIRP limit and more) and the Wireless Security (includes the RADIUS MAC Authentication and MAC ACL, as well as the Security type: WEP, WPA, WPA-TKIP, WPA2, etc). This is absolutely fine for small businesses, like restaurants, that don’t rely on having a super strong network. It differs from a router in the sense that it lacks the built-in switch functions, the NAT capabilities and it won’t serve internal IP addresses to connected device. Il est conçu pour créer et gérer des réseaux sans fil à architecture mutualisée sur plusieurs sites. On the right side, there is a small recessed area with the EnGenius logo and five labelled LED lights which show the status of the 5.0Ghz radio, the 2.4Ghz radio, the LAN 2 and LAN 1 ports and the Power (each of these LEDs can be disabled using the provided software). It’s especially useful if you have someone on hand to keep an eye on the network as they will probably be able to improve the performance. It’s not the most user-friendly product, so we’d only buy it if you have some experience with this type of technology or have an IT technician on site. If you slide the bottom part of the UAP-Outdoor+, it reveals the Secondary 10/100Mbps Ethernet port (suitable for creating a bridge), a small Reset button (press and release quickly to reset the device or press and hold the button for more than 5 seconds to return the AP to factory default settings) and the Main 10/100Mbps Ethernet port (used to connect the AP to the LAN and DHCP server – the power can be provided by either the included PoE adapter or a 48V, 802.3ad compliant switch). Inside the case, the TP-LINK CPE510 is equipped with a 560 MHz Qualcomm Atheros Enterprise AR9350-BC2B SoC, 64 MB of DDR2 RAM, 8 MB of flash memory and an Atheros AR9350 chip dedicated for the WLAN. The Ubiquiti UniFI Access Point is one of our favorite top-of-the-range outdoor access points. High 400mW Power and 19 dBi Dual Polarization, Capable of 5-mile point-to-point deployments. To mount the access point on a pole, you need to slide the metal strap through the back of the UniFi AP and use a screwdriver to securely fasten the strap to a pole. FREE Shipping by Amazon . 2. Next, you should use surge arresters and surge protectors (with a proper grounding) so, in case your device gets hit by lightning, the damage will be minimum (it’s cheaper to change an antenna than the entire access point unit). The Configuration section allows the user to set up the Radio (the Radio Mode, Driver Mode, Range Unit, the Subscriber Module Scanner and more), the Quality of Service (three-level priority with packet classification by COS, VLAN ID, IP + MAC address, DSCP, Station Priority, Broadcast and Multicast), the System (set up the Account Management, view the System Logging and configure the cnMaestro Remote Management access), the Network and the Security. Simply put, a wireless access point is an interface that takes the data from a wired connection (LAN), converts it to a 2.4 or 5GHz wireless signal and further transmits (and receives) it to all devices that have a wireless adapter. Lieferzeiten in Tagen (Mo-Fr ohne Feiertage). von 07:00 - 19:00 Uhr TP-Link Omada AC1200 Gigabit Wireless Access Point | MU-MIMO Outdoor WiFi Extender | Seamle… If you are struggling with the signal in your home, check out our guide to the best wifi extenders and pick the perfect one. Nicht mit anderen Vorteilscodes kombinierbar. Another reason it’s so well-suited to outdoor environments is the IP-65 weatherproof rating. Versand. CTRL + SPACE for auto-complete. DrayTek VigorAP 920RP Outdoor Wireless Access Point. Secondly, it has MU-MIMO technology. Lastly, you have to insert the power cord into the other side of the PoE adapter and connect it to a power outlet.